Telemecanique Sensors
Inductive sensor, XS7, 40x40x15 mm, PBT, Sn 15 mm, NPN, NO, cable 2 m, form C flat, 12...24 VDC
Nicht im Verkauf
Telemecanique Sensors XS7C1A1NAL2, Inductive sensor, XS7, 40x40x15 mm, PBT, Sn 15 mm, NPN, NO, cable 2 m, form C flat, 12...24 VDC. Kategorie: Flache Bauform. Nicht im Verkauf; für dieses Produkt gibt es keinen Preis und kein Angebot.
- Referenz:XS7C1A1NAL2
- Hersteller / Marke:Telemecanique Sensors
Wichtige Eigenschaften
- Range Of Product
- Telemecanique Inductive proximity sensors XS
- Series Name
- General purpose
- Sensor Type
- Inductive proximity sensor
- Device Application
- Not applicable
Produktbeschreibung
Endüktif Sensör Xs7 40x40x15 - Pbt - Sn15mm - 12..24vdc - Kablo 2m
Technische Daten
Haupteigenschaften17
| Range Of Product | Telemecanique Inductive proximity sensors XS |
|---|---|
| Series Name | General purpose |
| Sensor Type | Inductive proximity sensor |
| Device Application | Not applicable |
| Sensor Name | XS7 |
| Sensor Design | Flat form 40 x 40 x 15 |
| Size | 15 mm |
| Body Type | Fixed |
| Enclosure Material | PBT |
| Type Of Output Signal | Discrete |
| Wiring Technique | 3-wire |
| Discrete Output Function | 1 NO |
| Electrical Connection | Kabel |
| Discrete Output Type | NPN |
| [Us] Rated Supply Voltage | 12...24 V DC with reverse polarity protection |
| IP Degree Of Protection | IP68 double insulation conforming to IEC 60529 |
| Switching Capacity In MA | <= 100 mA DC with overload and short-circuit protection |
Ergänzende Eigenschaften17
| Detector Flush Mounting Acceptance | Flush mountable |
|---|---|
| Material | Kunststoff |
| Output Circuit Type | DC |
| Detection Face | Frontal |
| Front Material | PBT |
| Differential Travel | 1...15 % of Sr |
| Wire Insulation Material | PVC |
| Cable Composition | 3 x 0.34 mm² |
| Sensing Range | 8...15 mm |
| Status LED | Output state: 1 LED (yellow) |
| Switching Frequency | <= 1000 Hz |
| Current Consumption | <= 10 mA no-load |
| Voltage Drop | <2 V (closed) |
| Delay First Up | 10 ms |
| Marking | CE |
| Delay Response | 2 ms |
| Delay Recovery | 5 ms |
Umgebungsbedingungen3
| Product Certifications | CSA, C-Tick, Ecolab, UL |
|---|---|
| Shock Resistance | 50 gn for 11 ms conforming to IEC 60068-2-27 |
| Vibration Resistance | 25 gn amplitude = +/- 2 mm (f = 10-55 Hz) conforming to IEC 60068-2-6 |
Verpackungseinheiten18
| Unit Type Of Package 1 | piece |
|---|---|
| Number Of Units In Package 1 | 1 |
| Package 1 Height | 4.3 cm |
| Package 1 Width | 9.7 cm |
| Package 1 Weight | 125 g |
| Package 1 Length | 13.4 cm |
| Unit Type Of Package 2 | S02 |
| Number Of Units In Package 2 | 16 |
| Package 2 Height | 15 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 2.455 kg |
| Unit Type Of Package 3 | P06 |
| Number Of Units In Package 3 | 256 |
| Package 3 Height | 75 cm |
| Package 3 Width | 40 cm |
| Package 3 Length | 80 cm |
| Package 3 Weight | 57 kg |
Nachhaltigkeit des Angebots1
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
|---|
Dokumente und Downloads
Die Dokumente werden vom Hersteller veröffentlicht und in einem neuen Tab geöffnet.
Datenblätter1
Prospekte4
CAD-Zeichnungen3
- Inductive proximity sensors OsiSense XS, flat form 40X40X15, flush mountable, plastic, - 3D CAD (dxf)Öffnet in einem neuen Tab
- Inductive proximity sensors OsiSense XS, flat form 40X40X15, flush mountable, plastic, - 3D CAD (stp)Öffnet in einem neuen Tab
- Inductive proximity sensors OsiSense XS, flat form 40X40X15, flush mountable, plastic, - 3D CAD (dwg)Öffnet in einem neuen Tab