| Local Display | With |
|---|
| Number Or Control Scheme Lines | 0…500 with FBD programming; 0…240 with ladder programming |
|---|
| Cycle Time | 6…90 ms |
|---|
| Backup Time | 10 years at 25 °C |
|---|
| Clock Drift | 12 min/year at 0…55 °C; 6 s/month at 25 °C |
|---|
| Checks | Program memory on each power up |
|---|
| [Us] Rated Supply Voltage | 24 V |
|---|
| Supply Voltage Limits | 19.2…30 V |
|---|
| Maximum Supply Current | 180 mA (with extensions); 70 mA (without extension) |
|---|
| Power Dissipation In W | 10 W with extensions; 5 W without extension |
|---|
| Reverse Polarity Protection | With |
|---|
| Discrete Input Number | 16 conforming to IEC 61131-2 Type 1 |
|---|
| Discrete Input Type | Resistive |
|---|
| Discrete Input Voltage | 24 V DC |
|---|
| Discrete Input Current | 4 mA |
|---|
| Counting Frequency | 1 kHz for discrete input |
|---|
| Voltage State 1 Guaranteed | >= 15 V for I1...IA and IH...IR discrete input circuit; >= 15 V for IB...IG used as discrete input circuit |
|---|
| Voltage State 0 Guaranteed | <= 5 V for I1...IA and IH...IR discrete input circuit; <= 5 V for IB...IG used as discrete input circuit |
|---|
| Current State 1 Guaranteed | >= 1.2 mA (IB...IG used as discrete input circuit); >= 2.2 mA (I1...IA and IH...IR discrete input circuit) |
|---|
| Current State 0 Guaranteed | <= 0.5 mA (IB...IG used as discrete input circuit); <= 0.75 mA (I1...IA and IH...IR discrete input circuit) |
|---|
| Input Compatibility | 3-wire proximity sensors PNP for discrete input |
|---|
| Analogue Input Number | 6 |
|---|
| Analogue Input Type | Common mode |
|---|
| Analogue Input Range | 0...24 V; 0...10 V |
|---|
| Temperature Probe Type | NTC 10k at 25 °C; NTC 1000k at 25 °C; KTY81 210/220/221/222/250; Pt 500 |
|---|
| Maximum Permissible Voltage | 30 V for analogue input circuit |
|---|
| Analogue Input Resolution | 8 bits |
|---|
| LSB Value | 39 mV for analogue input circuit |
|---|
| Conversion Time | Smart relay cycle time for analogue input circuit |
|---|
| Conversion Error | +/- 5 % at 25 °C for analogue input circuit; +/- 6.2 % at 55 °C for analogue input circuit |
|---|
| Repeat Accuracy | +/- 2 % at 55 °C for analogue input circuit |
|---|
| Operating Distance | 10 m between stations, with screened cable (sensor not isolated) for analogue input circuit |
|---|
| Input Impedance | 12 kOhm for IB...IG used as analogue input circuit; 12 kOhm for IB...IG used as discrete input circuit; 7.4 kOhm for I1...IA and IH...IR discrete input circuit |
|---|
| Number Of Outputs | 10 transistor |
|---|
| Output Voltage | 24 V transistor output |
|---|
| Output Voltage Limits | 19.2...30 V DC (transistor output) |
|---|
| [Uimp] Rated Impulse Withstand Voltage | 4 kV conforming to EN/IEC 60947-1 and EN/IEC 60664-1 |
|---|
| Load Current | 0.5…0.625 A transistor output |
|---|
| [Ures] Residual Voltage | 2 V at state 1 transistor output |
|---|
| Overload Protection | With overload protection for transistor output |
|---|
| Short-circuit Protection | With transistor output |
|---|
| Overvoltage Protection | With overvoltage protection for transistor output |
|---|
| Clock | With |
|---|
| Response Time | <= 1 ms (from state 0 to state 1) for transistor output; <= 1 ms (from state 1 to state 0) for transistor output |
|---|
| Connections - Terminals | Screw terminals, 1 x 0.2...1 x 2.5 mm² (25 AWG...14 AWG) semi-solid; Screw terminals, 1 x 0.2...1 x 2.5 mm² (25 AWG...14 AWG) solid; Screw terminals, 1 x 0.25...1 x 2.5 mm² (24 AWG...14 AWG) flexible with cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) solid; Screw terminals, 2 x 0.25...2 x 0.75 mm² (24 AWG...18 AWG) flexible with cable end |
|---|
| Tightening Torque | 0.5 N.m |
|---|
| Overvoltage Category | III conforming to IEC 60664-1 |
|---|
| Net Weight | 0.3 kg |
|---|
